Category: Furnace Troubleshooting

Installation of a furnace ranges from high-end places to some highly crowded places. You can have a fair estimate on how long the furnace installation will take by looking at the enormity of the place.

Some of the Most Common Places for an Installation Are:

● Basements
● Attics
● Laundry rooms
● Garages
● Factories

Factors that Show How Much Time an Installation Requires:

There are a variety of factors that highly affect the installation of a furnace and decides on how long is it going to take for the same:

• The Size of the Building
  This factor will primarily regulate the size of the furnace, which will further regulate the time taken to install the furnace. The larger the area, the lengthier the time.
• The Kind of Installation Which is Required
  The kind of furnace that is to be installed also highly determines the time that the entire installation process will take. For example, if an air conditioner needs to be installed at your residence, the time consumed will be extremely minimal. But, if a centrally located air conditioner needs to be installed in a restaurant, you can take professional help from Heater installation Phenix city.

• The Kind of Unit Which is Required
  This factor is a continuation of the above. In this case, if the unit is pre-installed, the time consumed would be very minimal compared to the installation of both; the furnace and the unit.
• The Location of the Installation
  As mentioned, this factor will make or break the time you spend installing the furnace. In this case, the type of furnace installed, natural gas, oil, electric, propane, also makes a big difference. It is also important to know what location complies best with the kind of furnace.
• The Time Frame for a Furnace Installation Ranges from 4-8 Hours
  If you are looking to install a furnace at your home, you need not worry about spending an entire day doing that. Simply 4-8 hours can have your work be smoothly completed.
  Nevertheless, installing a furnace may be a tedious and complex task as it might want you to sweat a little extra on that gas line, duct line, or electricity supply.
  Now, if you are looking to install a furnace in a much larger space, for example, a factory, it is naturally going to take longer. The timings for that vary from 4-10 hours depending on the complexity of the additional products that need to be installed to fit a furnace successfully.

How and When Would a Furnace be Required to be Re-Installed or Replaced?

You are required to replace a furnace only in case of any failure in the duct system, which is not usually happening in small spaces like a residence. Nevertheless, if you make it to the odds, you need not worry.

Heater installation Phenix city will help you replace or install a brand-new furnace and will take much less time. It would have taken even less time, but re-installing a new duct system might be a little flustering.

You can contact the relevant HVAC service near me to experience a smooth furnace installation process. You can also visit the Priority Indoor Comfort services. You can also experience a tip-of-the-finger service by calling (334) 297-9820.

Furnaces are age-old heating units that have been serving most American households during winters. All thanks to their low operating noise, high energy efficiency, and long lifespans. In addition, furnaces can be easily installed in every type of house.

However, many homeowners are not aware of the type of furnace installed. That’s right; a furnace can be of various types depending on the energy source. If you are not sure about the type of furnace at your home, you might consult a professional heater installation in Phenix City.

Meanwhile, here is a little guide on the three major types of furnaces available in the market.

3 Different Types of Furnaces

• Gas Furnace
  The most common type of furnace you can find in houses is the gas furnace. Also known as a natural gas furnace, this heating unit uses gas coming from the municipal line.
  The furnace is equipped with gas jets that operate along the burner ignite to create the hot combustion gas. This eventually raises the temperature of the air, which is then circulated in the house by the fans. Gas furnaces are pretty effective at creating and distributing heating evenly and do not cost much to run. The primary reason behind its low operating cost is the low prices of gas compared to other fuels.
  However, if you experience cold spots much often, you might need to contact a professional HVAC service near me.

• Oil Furnace
  Not every household can have access to natural gas pipelines. In such cases, you might have an oil furnace. If you are situated in cold environments such as the northeastern United States, you most probably have an oil furnace. As the name suggests, oil furnaces use oil as a fuel to produce heat.
  However, keep in mind that oil furnaces are less energy-efficient than gas furnaces. A typical AFUE rating for oil furnaces is around 80-90 percent, whereas, for gas furnaces, it is about 88-98 percent.

• Electric Furnace
  If you don’t have a natural gas line connected to your house, you can contact the heater installation in Phenix City for an electric furnace. This heating system is an electrically powered furnace in which electricity is converted into heat and transferred to the air. Electric furnaces are also quite inexpensive and compact as compared to other furnaces, making them easy to fit into small living spaces as well. However, like oil furnaces, electric furnaces are usually a lot less efficient than gas furnaces. Nevertheless, they can be a perfect fit for many households depending on the scenario.
  Heat pumps emerge as a great alternative to furnaces. This HVAC unit also runs on electricity and can heat and cool your home. If you are located in a mildly cold region, you can enjoy warm and comfortable winters with a heat pump alone!

So, if you think you need a new furnace or a replacement, you can trust us. We provide the best heating installation, service, replacement, and HVAC repair near me.

Call us today at (334) 297-9820 to schedule a service!

We often buy things without bothering much about the model number or a serial number of that thing. But have you ever wondered what secrets or information the model number can tell about your product? When it comes to furnaces, it becomes important to check the model number so that you can keep track of all the information on it. The model number of a furnace can vary according to the company or the type of the furnace. The model number can also determine a lot of information about the product which we might have missed during the purchase of the product.

The model number of a furnace is divided into different parts which can tell different things about your product. However, the model numbers can be encoded differently by different companies which can tell you different things about the product. Generally, the serial number can be like G26Q3/4-100-1 or it can be a ten-digit number like 1404123456.

These Things Can be Easily Determined Using the Model Number –

1. Series Number
   The first three digits, that is G26 in the above example can tell us about the series number of the product. G here stands for Gas and 26 means 26th unit produced in the lot.
2. Unit capacity or Size
   The next three digits, that is Q3/4 can tell you about the capacity and size of your furnace unit. Q3/4 here refers to 3-ton or 4-ton unit capacity. There is 400 CFM(cubic feet per minute) of airflow per ton. This means that the capability of the air movement of a particular unit is 1200/1600 CFM.
3. Age of the Unit
   Some furnace models of a particular company like Goodman can also tell you about the age of your unit by telling in which month and year the unit was manufactured. For example in model number 1404123456, the first four digits, that is 1404 tells you that this unit was manufactured in April 2014. Some companies like Lennox tell you about age by using alphabets where A stands for January, B stands for February, and so on.
4. BTU Rating
   BTU (British Thermal Unit) rating is the rating in thousands that determines the efficiency of the unit. In the above example, 100 refers to the BTU rating which is 100,000. This furnace has an input of 100,000 BTUs. Output depends upon the efficiency of the furnace. If this furnace is 90% efficient so the output will be 90,000 BTUs.
5. Revision (Dash) Number
   The last number shows the number of revisions that have been made to the model series. This number indicates the revision has occurred to the model series not requiring a series change. This revision number is very important in repair part identification.

Sometimes, model numbers can also tell you a lot of things about the things we purchase but we didn’t pay attention to while purchasing. Different types of furnaces from different companies have different data on their model or serial numbers. If we know how to properly read the serial number of the furnace, we can easily determine many things about it by ourselves.

You can also check out Priority Indoor Comfort for getting the cheapest heater repair in Phenix City. They also provide the best furnace repair and service in Phenix City. Their team is available 24×7 and they have professionals who are experts in their fields and provide the best service.